Jump to content

xigncode issues


GoddessSand

Recommended Posts

So, since the event patch I've gotten that game guard error several times. I was usually able to finally get into the game without needing to do anything but repeat till it finally works. Last patch the loading of the game either wouldn't happen or that game guard screen would show up. How I think I fixed it since it has worked and not seen that issue yet.

Windows 10 is my OS, so I can't comment if it will work for any other Windows OS but you could pretty much follow the same steps or similar steps.
1) on the bottom right of the screen by the time clock there's a shield icon with a green check mark, if you can't see it click the ^ icon. Left click the shield.
2) left side you will see Firewall & network Protection, click on that.
3) down below Public Networks in the middle you will see Allow an App through firewall, left click on that.
4) Click on Change settings, it's above the box that has all the allowed apps that are checked.
5) toward the bottom there's Allow another App... icon to left click on.
6) under the white box click on browse icon.
7) Follow the following path line or folders,
                            pathline
                                       C:\Vendetta Gaming Network\Scarlet Blade Vendetta\xigncode
                            
                            folders
                                      - local disk(usually the C drive or the drive you installed SB to), 

                                      - Vendetta Gaming Network
                                      - Scarlet Blade Vendetta
                                      - xigncode

8 ) click on the xm app and then click on open
9) down on the bottom click on add
10) scroll down the allowed apps and features and make sure next to the name of the xm app is checked and the right under private and public that both are checked. Then click on OK.

you are done and can close those windows and then try to run Scarlet Blade Vendetta to see if it works like it should. 

 

 

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

Try this method if you use Windows 10 to flush the DNS like LunaNyx suggested

To flush the DNS cache in Windows 10 please follow these steps:
  1. in the search type command prompt.
  2. Click on Command Prompt.
  3. The Windows Command Prompt Window will appear. Type in: ipconfig /flushdns. and press ENTER.
  4. You should receive the following message: Windows IP Configuration. Successfully flushed the DNS Resolver Cache.
  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...